Xantrex SW Communications Adapter Manuel d'utilisateur télécharger pdf (Page 20)

3.0 OPERATION

P/N 973-0022-01-01 Rev A 04/2002

LED Control Indicators

The codes indicate the status of the inverter’s LEDs. The two letter codes are

as follows:

noitaiverbbA noitinifeD

NIgnitrevnI

TLeiTeniL

1ANI1CA

2ANI2CA

KBkluB

LFtaolF

RErorrE

COtnerruCrevO

Table 3-2

LED Control Indicator Definitions

If no codes display, it is because there are no LEDs on or the adapter is not

responding.

NOTE: If an LED is flashing, it may not appear each time

you pressed “1” because it was not illuminated when the

SWCA sent the data to the computer. A flashing o LED

should be indicated by the LED two letter code being

repeated on the display.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Pas de commentaire

Xantrex SW Communications Adapter Manuel d'utilisateur Page 20