Xantrex XPD 18-30 Manuel d'utilisateur télécharger pdf (Page 26)

Section 2. Installation

Inspection, Cleaning, and Packaging

24 Operating Manual for XPD Series Power Supply

Inspection, Cleaning, and Packaging

Initial

Inspection

When you first receive your unit, perform a quick physical check.

1. Inspect the unit for scratches and cracks in the chassis and front panel, and for

broken switches, connectors, and displays.

2. If you see external damage or suspect internal damage, have a service technician

check the unit before attempting to use it. If the unit is damaged, save all packing

materials and notify the carrier immediately. See packing instructions in

“Returning Power Supplies to the Manufacturer” on page 25.

3. Ensure that the packing box contains the 7.5' (2.5 m) power cord.

Periodic

Cleaning

No routine servicing of the power supply is required, except for periodic cleaning.

Whenever a unit is removed from operation, clean the metal surfaces with naptha or

an equivalent solvent and the front panel with a weak solution of soap and water. Use

low-pressure compressed air to blow dust from components on the printed circuit

boards.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Pas de commentaire

Xantrex XPD 18-30 Manuel d'utilisateur Page 26